Important message from Poseidon

Poseidon

These inner bladders have been mounted in W50 wings sold during the period: 2007-09-16 - 2008-06-10.

To check if you have an inner bladder effected by this manufacturing error, do the following:

Between the two ´legs´ of the W50 wing, there is a zipper. Open this zipper.

You should now see the inner bladder. Between the two ´ legs´of the inner bladder, there is a tab with the article number, batch number and manufacturing year.

If the batch number on this tab reads 5445, the inner bladder might be defect.

If there is an other batch number, then the bladder is not effected by this information.

If you have an inner bladder from batch no 5445, we recommend that you DO NOT dive with the wing, until the inner bladder has been replaced!

Poseidon Diving Systems AB will replace all W50 inner bladders from manufacturing batch no 5445.

We ask you, who has an inner bladder from manufacturing batch 5445, to contact the dive store where you bought your W50 wing as soon as possible, so that your W50 bladder can be replaced as soon as possible.

Unfortunately, the manufacturing error was not detectable at the quality control that each inner bladder is put through prior to delivery.

Poseidon Diving Systems apologizes for the inconvenience this is causing but we hope to be able to replace these inner bladders as quickly as possible!